| Video input |
Input |
30 frames / sec |
| Input size |
Max. capture size : 640 x 480 pixels |
| Channel |
| * S 512 / 514 |
1 channel |
| * S 522 / 524 |
2 channels ( switching ) |
|
| Terminal / connector |
BNC connector |
| Input signal |
NTSC standard |
| Video 0utput |
Output |
"Through" output of video input |
| Channel |
1 channel ( 2 channels for output destination, output to front / rear panels ) |
| Terminal / connector |
BNC connector |
| Input signal |
NTSC standard |
| Video transmission |
Transfer size |
640 x 480, 320 x 240, 160 x 120, 80 x 60 pixels |
| Compression method |
KAM compression |
| Transfer speed |
Depends on network speed ( 30 frames / sec. max. ) |
| Adjustment function |
Brightness, contrast, color depth, color balance, video quality |
| Control function |
B/W-color switching, up/down, flipping, right/left flipping,
superimposing, inserting date/time/channel number/
camera number, digital zooming ( x 8 max. ) |
| Sensor function |
Video sensor, motion sensor |
| Distribution function |
Distribution function,(master/slave setting) |
| Voice input |
Input |
Sampling frequency 22.05 kHz monaural |
| Channel |
1 channel |
| Terminal / connector |
BNC connector |
| Signal |
Line input |
| Voice 0utput |
Output |
Sampling frequency 22.05 kHz monaural |
| Channel |
1 channel |
| Terminal / connector |
BNC connector |
| Signal |
Line output |
| Voice transmission |
Transmission speed |
11.025 kHz / 5.5125 kHz switching |
| Voice receiving |
Transmission speed |
11.025 kHz / 5.5125 kHz switching |
| I/O |
Built-in I/O |
[Standard]
4 input ports, 4 output ports,
( photo isolation, D-sub 25 pin plug ) |
| Option |
4 input ports, 8 output ports,
( photo isolation, D-sub 25 pin plug )
Voltageless contact I/O
( by built-in expansion board ) |
| Serial port |
1 channel each for camera control, console
Direct control possible by applying SDK |
| Camera control |
No. of units controllable |
| * S 512 / 514 |
1 unit |
| * S 522 / 524 |
1 unit |
|
| Function |
Automatic recognition function /
camera fixing function for control |
| Signal |
RS232C |
RS422 / 485 |
| Terminal / connector |
D-Sub 9Pin |
D-Sub 9Pin socket. |
| Compliant camera |
|
Canon
|
:
|
VC-C4 , VC-C4R
VC-C50i , VC-C50iR
|
|
Sony
|
:
|
EVI-G20 (built to order)
|
|
|
Mitsubishi
|
:
|
CIT-7500
|
|
Terry
|
:
|
MDO-1100
|
|
Hinox
|
:
|
VTC-401(built to order)
|
|
| Control function |
Control program |
Possible to execute 16 control programs locally
( Requires SDK ) |
| Virtual port |
8 bit x 16 ( 8 : retaining contents ) |
| Time setting |
Via network : for controlling designated camera,
1 channel each for console
( possible to control directly using SDK ) |
| Security |
Password function |
Possible to designate password from console |
| Network |
Protocol |
TCP/IP, ( possible to designate IP address, subnet mask,
gateway ), UDP |
| Ethernet |
Auto Negotiation |
| Expanded function |
* Automatic turn off fuction against communication
destination under no communication status
* Rebooting fuction for no connection detection
* Priority connection / connection destination detection
function |
Booting
Network |
Boot / shutdown |
ON LINE LED is On in online mode |
| Operation |
Remote
Local |
:
: |
Via network ( PC with network interface )
Console terminal ( PC with RS232C interface ) |
|
| Dimension |
Main unit dimensions |
(W)132 mm x (D)180 mm x (H)44 mm ( excluding protrusion ) |
| Main unit dimensions |
800g approx. |
| Power supply dimensions |
(W)58 mm x (D)95 mm x (H)34 mm ( excluding protrusion ) |
| Power supply weight |
250g approx. |
| Power supply |
Power supply terminal |
DC + 5V, supplied by AC adapter as accessory |
| AC voltage input |
AC100 240V 47 63Hz |
| Power consumption |
10 w max. |
Working
environment |
Working temperature |
-10 50 |
| Working humidity |
20 85 ( subject to no dew condensation ) |
| Saving temperature |
-20 60 |
| Saving humidity |
10 90 ( subject to no dew condensation ) |
| Others |
Local operation |
The console for a maintenance
( PC of RS232C connection ) |
| Continuous working function |
* Watch dog timer
* Diskless, fanless system |
| Indicator |
Monitoring LED for Transmission/receiving, power source lamp, online lamp |
| Updating |
Network updating function for firmware |
